1. IGBT module and inverting technologies, better performance ,higher reliability and lower maintenance cost;
2. 100% duty cycle, continuous working is allowed at maximum power output;
3. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
4. Display of heating power and heating current and oscillating frequency;
|Max. input power||15KW|
|Max. input current||23A (min. 40A 3phase circuit breaker required)|
|Power cord||Cross Section mm2/per wire (copper core): 4mm2|
|Input voltage||3-phase 380V, 50/60Hz (custom make available upon request)|
|Duty cycle||100% (24hours continuous working)|
|Heating timer||1-99 seconds|
|Retaining timer||1-99 seconds|
|Air cooling||Rear fan|
|Power supply cooling water desire||≥0.2 Mpa ≥3L/Min|
|Whole system cooling water desire||≥0.2 Mpa ≥6L/Min|
|Generator size (L x W x H)||460 x 270 x 450mm|
|Generator N.W.||26 kg|
● With IGBT module power components and current inverting control technology, and parallel oscillating circuit is used.
● Wide frequency range from 1KHZ to 20KHZ, it is easy to match the machine according to the parts and heating desire.
● Due to the parallel oscillating structure, it is easy to get the best matching of the machine to get high heating efficiency and full power output of generator.
● Due to the high technologies of inverting control, soft and accurate switching control is realized to assure the high reliability and low repair of the machine.
● Small size , compared with SCR controlled induction heating machine, only 1/10 working space is needed, greatly reduce occupation space.
● High efficiency and energy saving, a high power factor and power efficiency within the scope of full power.
● With wide frequency range from 1-20KHZ automatic tracking ability, no need adjustment at scene.
● 100% duty cycle , 24hours continuous working ability at maximum power.
● Constant output voltage or power control modes are alternative.
● Full display of output power, output frequency, output voltage and current.
● Simple operation, operate can be learned in a few minutes.
● Simple installation: connect the machine to 3phase 380VAC and cooling water only.
● Timer can be chosen to preset and adjusted the heating time, heating power, retaining time, retaining power respectively to control the heating curve and heating temperature.
● Heating power, retaining power, heating time, retaining time can be preset and adjusted, this makes it possible to control the heating curve and heating temperature.
● It is suitable to use in the repeated heating or high speed heating of small parts.
● By presetting the timer and the power of the generator, retaining can be realized to a certain extent.
Application Range and Show
● Medium frequency induction heating machines are usually used in the penetration heating occasions, for example, Rod heating for forging
● Melting of almost all kinds of metals
● Heating of stators or rotors for fitting
● Heating of tube end for extrusion
● Heating of moulds
● Deep quenching of shafts and gears
● Tempering or preheating of weld joint and so on .
Company Name：SHENZHEN FENGTAI INDUSTRIAL CO,.LTD
Address：Guanguang Road, No.1056,GuanLanTown ShenZhen, China